Genie GS-2669 RT Battery Dead After Sitting

Confirmed cause: The joystick trigger (enabling switch) was mechanically stuck in the activated position, keeping the platform controller module awake and drawing current even when the machine was off. Repair performed: Freed the stuck joystick trigger and cleaned the assembly. Lubricated the pivot mechanism to prevent reoccurrence. Verification: With the joystick trigger confirmed to be in its neutral position, the parasitic draw test was repeated. The current draw dropped to an acceptable level. The machine was started and shut down several times, and the battery voltage remained stable. Technician notes: - This is a good reminder to check for simple mechanical issues before replacing expensive electronic components. - The design of this joystick guard can sometimes trap the trigger if it is not released cleanly. - Always confirm the repair by repeating the test that identified the fault.